【美國LiquidWrench】煞車卡鉗潤滑劑  


  • 潤滑和防止腐蝕
  • 消除卡鉗噪音,防止顫動
  • 防水
  • 抗高低溫,不易熔
  • 減少磨損,極壓保護
  • Timken OK load 60

$1,000
規格型號 L608
庫存狀況 現貨
購買數量

加入購物車



Liquid Wrench® Synthetic Caliper Grease is a moly (molybdenum disulfide) fortifi ed synthetic lubricant, formulated to lubricate under the most adverse conditions. It is excellent for lubrication in high temperature applications where other greases fail. Liquid Wrench® Synthetic Caliper Grease with its extreme pressure and corrosion resistant capabilities, is excellent on all bearings and sliding surfaces operating in conditions above 500° F. Liquid Wrench® Synthetic Caliper Grease is compatible with most rubber and plastic hardware, including ethylene-propylene rubber.

【美國LiquidWrench】煞車卡鉗潤滑劑是鉬(二硫化鉬)強化合成潤滑脂,針對最糟糕的潤滑環境所研製而成。這是超過其他品牌的優秀潤滑脂。憑藉其強大的極壓和耐腐蝕能力,【美國LiquidWrench】煞車卡鉗潤滑劑抗高溫達500° F可潤滑軸承及磨擦表面, 亦適用大多數橡膠和塑料硬件及ethylene-propylene塑料

DIRECTIONS: Wire brush the caliper housing and anchor plate to remove all dirt and dust. Remove loose dirt from surface to be treated. Surface should be clean and dry. Apply grease to all moving caliper hardware mating surfaces and steel backing plates of the disc brake pads. IMPORTANT: In order to maintain proper braking function any excessive grease squeezed out from between mating surfaces must be removed. Apply sparingly.

1. 用鋼刷清除卡鉗及固定板的髒污、灰塵及塵土。

2. 確保潤滑部件乾淨及乾燥, 將本品塗抹在要潤滑的部件上

注意: 為了維持煞車能正常運作, 結合煞車部件時溢出的潤滑脂請擦拭掉。

發表評論


注意 不支援 HTML 語法
點擊 「繼續」按鈕 即同意:「我保證本則針對此商品的評論,其內容是以本人的切身經歷為依據,係本人的真實評論;且本人與此商品無個人或商業關係,也無收受此商品的餽贈或金錢以撰寫這則評論。」

繼續
 請先會員登入,再進行商品評論

登入會員